ResMed AirCurve10 VAuto BiPAP Machine Overview:
ResMed AirCurve10 VAuto BiPAP Machine is an auto-adjusting bilevel machine that uses the comfort of both the AutoSet algorithm and Easy-Breathe waveform in its VAuto algorithm to treat obstructive sleep apnea patients who can benefit from greater pressure support. The AirCurve 10 VAuto adjusts the baseline pressure to hold the airway open while maintaining a fixed pressure support.
Product Details of ResMed AirCurve10 VAuto BiPAP Machine:
| Brand | ResMed |
| Model | AirCurve 10 Vauto |
| Usage/Application | Hospitals & Personal Use |
| Pressure Range (cm H2O) | S, VAuto: 2 to 25 cm H2O (2 to 25 hPa); CPAP: 4 to 20 cm H2O (4 to 20 hPa) |
| Ramp Rate (mins) | 5 to 45 minutes |
Additional Details
| Pressure Sensor | Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) |
| Power Supply Unit | 90 W, AC input range:100–240 V, 50–60 Hz 1.0–1.5 A, Class II 115 V, 400 Hz 1.5 A, Class II (nominal for aircraft use); DC output:24 V 3.75 A |
| Flow Sensor | Internally located at device inlet, digital mass flow type, -70 to +180 L/min |
General System
| Weight With Humidifier | 1248 gm |
| Dimensions | 205 x 150 x 116 mm (without humidifier), 255 x 150 x 116 gm (with humidifier) |
| Warranty | 2 Years |
Comfort Features
| Operating Temperature | +5°C to +35°C Note: The air flow for breathing produced by this therapy device can be higher than the temperature of the room. Under extreme ambient temperature conditions (40°C) the device remains safe. |
| Operating Altitude | Sea level to 2591 m; air pressure range 1013 hPa to 738 hPa |
Sound
| Pressure Level Measured | According to EN ISO 17510-1:2009 (CPAP mode); SlimLine: 26.6 dBA with uncertainty of 2 dBA, Standard: 26.6 dBA with uncertainty of 2 dBA |
| Power Level Measured | According to EN ISO 17510-1:2009 (CPAP mode); SlimLine: 34.6 dBA with uncertainty of 2 dBA, Standard: 34.6 dBA with uncertainty of 2 dBA |
Additional Details
| Operating Mode | S, VAuto, CPAP |
| Housing Construction | Flame retardant engineering thermoplastic |
| Supplemental Oxygen | Maximum flow: 15 L/min (CPAP, S); 4 L/min (VAuto) |
| Standard Air Filter | Material: Polyester non woven fibre, Average arrestance: >75% for -7 micron dust |
| Hypoallergenic Air Filter | Material: Acrylic and polypropylene fibres in a polypropylene carrier, Efficiency: >98% for:- 7-8 micron dust; >80% for:- 0.5 micron dust |
| Air Outlet | 22 mm |
| Water Capacity | To maximum fill line 380 mL |
| Typical Power Consumption | 53 W (57 VA) |
| Peak Power Consumption | 104 W (108 VA) |
| Maximum Single Fault Steady Pressure | Device will shut down in the presence of a single fault if the steady state pressure exceeds:30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec |
| Wireless Module | Technology used:4G, 2G. It is recommended that the device is a minimum distance of 2 cm from the body during operation. Not applicable to masks, tubes or accessories. Technology may not be available in all regions |
Features of ResMed AirCurve10 VAuto BiPAP Machine:
- Easy-Comfort Breathe Technology
- Consistent Humidification
- Built-in Ambient Light Sensor
- Continuous Leak Management
- Quiet Easy-Breathe Motor
- Climate Control
For any kind of assistance you can Contact Us Or Visit our Official Facebook Page
Brand
ResMed
ResMed in Bangladesh
Be the first to review “ResMed AirCurve10 VAuto BiPAP Machine”
Related products
BIPAP MACHINES
190,000.00৳
BIPAP MACHINES
150,000.00৳
BIPAP MACHINES
180,000.00৳
BIPAP MACHINES
140,000.00৳
BIPAP MACHINES
189,000.00৳
BIPAP MACHINES
299,000.00৳
Reviews
There are no reviews yet.